Page 99 of 224

Inventory Management Software for Retail Industry

Inventory Management is of prime concern in retail industry. The profit per unit of a product in retail industry is miniscule. The whole industry runs on the belief that the miniscule margin can get multiplied by volume sales to make handsome gains.

The profitability of retail industry can only be made if administrative costs are low. Retail Industry can only employ optimal number of employees.

Click the link for particulars about retail industry

Inventory Carrying Costs

One of the very important aspects that can make or break a retail chain is the Inventory Carrying cost. The ideal retail unit would be one which can predict the exact number of items of a product that will be sold a particular day, so that that number is ordered. The net result is that the manufacturer can be paid for the goods it supplied from the proceeds of the sale made on that day. If one can not work that way, it means that the retail unit has to invest money to stock the retail unit. All unsold units at the end of the day costs one days interest on the value of the stock. This is called the Inventory Carrying Costs.

Just-in-Time Ordering

It may not be possible to implement the scenario above where inventory carrying cost is zero, but inventory carrying cost can be brought down by good inventory management software. Good inventory management software can trigger an order the moment the balance of stock for a product reaches below threshold levels. The quantity to be ordered need not be a constant quantity. It is possible to predict the sales of the product for the next order cycle by data mining the sales numbers of the store from historical sales figures. All these techniques are possible if you have an efficient inventory management software. While we will not be able to have a zero inventory cost, we may achieve substantial savings in cost by adopting Just-in-time ordering.

Benefits of Inventory Management System

We have checked out the benefits to the Retail Industry by adopting good inventory management software. One should not forget that the software can also benefit the manufacturer. One of the problems face by the Production Managers of manufacturing units is to choose the batch size of products. If they manufacture too many then they will have to bear the inventory carrying costs until it is dispatched to the Retail Units. If Retail Units can order in time and also predict their future orders, manufacturers can save costs too. The net result is that customers get their products at lesser costs.

POS Systems

One should not forget that the POS system operating at the retail unit counters is the biggest tool available to the supply chain management, It is the data produced at this counter that enables to manage inventory as well as predict future sales.

Source: Free Articles from ArticlesFactory.com

Want To Know About Shrink Fitting?

There could be many applications around us where we come across the need of fixing the two components together. Although there are different methods available to join them, but there in no guarantee that the joint will last long. Every day new techniques hit the market and different applications use these techniques in their own way. One such technique in Shrink Fitting. This technique is ideal for conditions when an interference fit in required. This method has replaced the traditional method of fitting a component into another by force lift method or to expand to outer component with heat. As these were traditional methods, there are some disadvantages with them. Force lift method can lead to mechanical damage between the two faces whereas the latter one can cause local damage or stress due to improper or poor heating procedures.

Detailed info and services about shrink wrap online here

Shrink fitting is found to be a good alternative to applications where fitting is carried out by heating the outer components or force fitting. With Liquid Nitrogen shrink fitting the necessary clearance is obtained by shrinking the inner component (instead of expanding the outer one). This is achieved by immersing the inner component in a bath of Liquid Nitrogen at a temperature of -196C. After assembly the inner component warms up, expanding to form a tight distortion free interference fit.

There are numerous advantages of Shrink Fitting. First it results in great cost savings. Within few seconds, a 4” diameter mild steel shaft can be shrunk by 7.6 in just 20minutes. It means no loss of time during oil bath or furnaces as the component is simply immersed in a bath of liquid nitrogen. The shrunken component is easier to work with than heat treated material therefore, reduces handling time.

Next advantage is its efficiency is ensuring low capital costs. As oil baths and heating furnaces will be removed, you can save huge capital costs. Moreover, you can save on valuable workshop space. The equipment required for Liquid Nitrogen shrink fitting is not only simple but inexpensive as well. One off jobs can be carried out with complete success using a metal bucket, empty oil drum or open tank as the LN bath. Small components can be handled using wires or cords. Larger components may require ordinary slings.

Among various methods of shrink fitting, liquid nitrogen fitting is found to be the safest method as it is inert and therefore reasonably safe to use in a workshop if proper ventilation is provided.

Want to know more about Shrink fitting? With over 20 years experience, Allied Pipefreezing can provide a cost effective solution to fit large or small components by interference.

Source: Free Articles from ArticlesFactory.com

5 Website Design Tips To Create A Visual Treat

Website design plays a crucial role in attracting and engaging the visitor of your business website. A good website design has the power to transform a visitor in a customer with its mesmerising design. So, hire Website Design Northern Beaches based professional to create an attractive website.

Just like any other industry, the world of web designing is also ever-evolving. Web designing also witnesses latest trends coming in short intervals. You need to have an attractive design and follow a trend, when it comes to create a website that will be used professionally.

More information about asheville web design here

Check out 5 important web design tips to create a visual treat.

The Design Should Be Clean And Clutter-Free

You may have noticed that the world we live in has become way too cluttered, and same is the case with web. Signs, icons, Ads, banners, buttons, pop-ups, and badges are only a few things that make it too messy.

Don’t you think that it’s for you and your business to offer your website visitors a clutter-free and outstanding experience? Grasping things such as flat design and white space can have a remarkable effect on your visitors’ experience. Remember, sometime less truly is more.

Have A Web Design Renaissance

If you’re reading this article, then you’re heading in the right direction. However, you can make your investigation a step further and look at sites with a particular reason: to find out the things you like about them and what you don’t. Make some notes on what you might want to imitate on your future site.

Would a long scrolling page function better on your site? Possibly you truly appreciate somebody else’s way to deal with their contact page. It can be something as little as mimicking a use of an arrow symbol that focuses to an essential message. Whatever you find engaging, consider how you can get it going in your own Website Design Northern Beaches plan.

Use A Visual Hierarchy

So, you haven’t heard about visual hierarchy before? No problem, it’s a term that fundamentally implies that our eyes focus on web space in a specific manner – an approach that can enable you to upgrade crucial content on your website. For instance, if you make a ‘join now’ button, there’s a strong possibility that you want more and more to click it and go through the sign-up steps.

Ensure That Content Is Readable Easily 

Remember, content on your website is really important. So, you need to make it readable

Ensure your colours complement each other

Try not to utilize tiny size for your website

Have same font size throughout the website

Don’t Forget To Get Benefits From The Mobile Version Of Your Website

Remember, all your efforts will become waste if your professional-looking website doesn’t have a professional-looking mobile version. In today’s world, you make one mistake and there you go – down and down. So, it becomes important for you to focus on all the areas and versions of your business website. All things considered, you would prefer not to pass up a major opportunity for potential site guests/clients since they’re on the tramBusiness Management Articles, isn’t that right? Nobody would like to miss out on potential website visitors or customers just because they don’t a good website design.

Source: Free Articles from ArticlesFactory.com

Tensions continue to rise in Middle East over “Mohammad Cartoons”

Friday, February 3, 2006

The publishing of a series of cartoons of the Prophet Mohammad in a Copenhagen newspaper sparked a string of harsh and in some places violent reactions in the Middle East, forcing European leaders to try to calm the situation.

This backlash started in late September 2005, when the Danish newspaper Jyllands-Posten published a dozen cartoons depicting the Prophet Mohammad. The images ranged from serious to comical in nature; a particularly controversial cartoon portrays Mohammad with a bomb wrapped in his turban. The Jutland-based newspaper states that the images were meant to inspire some level of public debate over the image of Islam in Europe, and had no direct aim of offending anyone.

However, many Muslims follow the doctrine of aniconism concerning the portrayal of Mohammad. This tenet of Islam states that the Prophet Mohammad should not be depicted in any type of art, regardless of the intent of the piece. This belief, along with the potentially insensitive nature of some of the caricatures, have caused offense to many Muslims in the Arab world.

In the past month, the controversy over these cartoons escalated. The cartoons were re-published last month in Spain, Italy, Germany, France and the Netherlands (where the latter two nations have large Muslim populations), and have begun to re-circulate throughout the Middle East.

Many Danish companies have been targeted for boycotts. As Wikinews reported last week, Arla Foods, Denmark’s top dairy company, has seen their sales fall to zero in some Middle East nations. Carrefour, a French retail chain, has pulled all Danish products from its shelves in the region. Earlier this week, protests were held throughout the region, including the Gaza Strip in Jerusalem, where Hamas supporters led an assault and protest that surrounded the European Union offices for Israel.

Hamas members, some armed with guns, stormed the EU office (which is primarily staffed by Arabs) and demanded apologies from EU member states, saying they would otherwise face serious consequences. “It will be a suitable reaction, and it won’t be predictable,” said Abu Hafss, a member of the Al Quds Brigade (an affiliate of the group Islamic Jihad), in a press conference outside the EU offices. And the Abu al-Reesh Brigades, a group related to the late Yassir Arafat’s Fatah party, warned that EU member states had 10 hours to apologize for the cartoons or their citizens would be “in danger”.

Jamila Al Shanty, a newly elected Hamas legislator, stated that more rallies will be planned in protest of the cartoons. “We are angry – very, very, very angry,” Al Shanty said today, adding that “No one can say a bad word about our prophet.”

The Iranian newspaper Hamshari daily has stated that on February 8 it will publish anti-semitic cartoons in response to the Danish cartoons, apparently failing to notice that Denmark has only a tiny Jewish population, since most escaped to Sweden during the World War II Holocaust. The newspaper says that the cartoons will lampoon the Holocaust despite denials by the Iranian government that the Holocaust even happened.

Jyllands-Posten, the newspaper that first published the cartoons did issue an apology to Arab countries on Monday, shortly after the EU office incident. But with the support of the government of Denmark, the newspaper had earlier defended its actions fiercely, citing the universal right to free press, and its duty to serve democratic traditions by inspiring debate. Indeed, Anders Fogh Rasmussen, Prime Minister of Denmark, said “We are talking about an issue with fundamental significance to how democracies work.” In fact, some European pundits have placed more fault on Muslims for refusing to “accept Western standards of free speech and pluralism”. When the cartoons were originally published in 2005 they were intended to highlight and redress the unequal restrictions applied to Islamic content in European newspapers in comparison with content referring to other religions. The cartoons are also self-referential, with one character in the cartoons writing in Arabic on a blackboard “Jyllands-Posten’s journalists are a bunch of reactionary provocateurs”, and another cartoon showing a cartoonist having to work in hiding because one of the cartoons he is drawing includes an image of the Prophet Mohammad. The text around the cartoons stated:

“The modern, secular society is rejected by some Muslims. They demand a special position, insisting on special consideration of their own religious feelings. It is incompatible with contemporary democracy and freedom of speech, where you must be ready to put up with insults, mockery and ridicule. It is certainly not always equally attractive and nice to look at, and it does not mean that religious feelings should be made fun of at any price, but that is less important in this context. […] we are on our way to a slippery slope where no-one can tell how the self-censorship will end. That is why Morgenavisen Jyllands-Posten has invited members of the Danish editorial cartoonists union to draw Muhammad as they see him. […]”

However, some world leaders have elected to help defuse what could be a major social crisis in Europe and the Middle East. France’s foreign minister Philippe Douste-Blazy said that freedom of the press should be exercised “in the spirit of tolerance”, sentiments which were echoed by United Nations General Secretary Kofi Annan. Ursula Plassnik, foreign minister of Austria, said that the European community must “clearly condemn” acts which insult religion. And Hamid Karzai, president of Afghanistan, warned Europe that “any insult to the Holy Prophet (Peace Be Upon Him) is an insult to more than one billion Muslims and an act like this must never be allowed to be repeated.”

Rasmussen, in an interview with Arabic TV Al arabia, said that “…Danish government condemns any expression and any action which offends people’s religious feelings…” and also said that he does not understand why, as the cartoons were originally published in September, the situation has only truly started to deteriorate in the past week.

In Denmark, there are counter-demonstrations by moderate Muslims saying they don’t want the images banned. Munira Mirza commented that many Muslims “want to be able to say: ‘Hey we’re not children, we can handle criticism, we don’t need special protection – we’re equal’. Many don’t want to be treated as a special group, seen as worthy of more protection from criticism than other groups because of their apparent victim status.”

Religious satirist Stewart Lee commented that Jyllands-Posten had “tried to deal with a subject they don’t know enough about, and this is one of the teething problems of the cross-over of cultures in the world. I’m sure the level of offence is far greater than would have been intended.”

The director (Directeur de publication) of “France Soir“, a French national newspaper was fired in response for publishing a cartoon titled: “Yes, we have the right to (joke about) characterise God” (Oui, on a le droit de caricaturer Dieu). The “France-Soir” web site is presently offline. The cartoon is partially visible on a nouvelobs.com website.

Today, Libération, another French national newspaper, is publishing two of the “Mohammad Cartoons”. Other newspapers across France are asking for their rights to freedom of the press to be defended.

Charlie Hebdo, a well-known satirical newspaper, will publish articles to support cartoonists, freedom of speech and freedom of the press.

The general reaction in France seems to be that most citizens except religious people (Catholics, Muslims,…) are astounded by the level of anger against the “Mohammad Cartoons”.

On February 9 2006 Queensland Premier Peter Beattie gave The Courier Mail Newspaper his blessings in publishing the Jyllands-Posten Muhammad cartoons/depictions of Muhammad stating that he is a firm believer in free speech and ones freedom of expression.On the very same day he got his legal representative to write to the author of this site photoduck.com demanding he censor material relating to him and his Government.

Although many newspapers have not republished the cartoons in order to avoid backlashes, the drawings have appeared on the Internet and are being revealed at a number of Web sites and blogs. On January 30th, Fox News contributor Michelle Malkin placed the drawings on her blog, and encouraged others to do the same.

Stimerex And Lipodrene Weight Loss Pills From Hi Tech

Submitted by: Mark DeRosa

Lipodrene is an ephedra-based weight loss pill that is made from a unique blend of select ingredients. It is said to promote weight loss in a fast, safe and effective manner.

It is quite common for people to be discontented with what they have. This is especially true in terms of their looks and physical appearance. Those who are white or fair-skinned would like to be tanned; those who are blonde would like to be brunettes. The same is true for people who are on the heavy side in terms of weight. The skinnier or the thinner, the better. However, losing weight is not as easy as changing your skin color or your hair color. It takes hard work, effort, and time. Sometimes, it even involves a certain amount of pain. Other times, it can also involve a hefty sum of money, especially if the individual decides to undergo a surgical procedure, such as liposuction or, in more extreme circumstances, a gastric bypass surgery.

Most people, however, want a quick, easy and effective solution to the problem or dilemma that they encounter. This is why in the field of weight loss, diet supplements and weight loss pills have been leading the pack for quite sometime now. This is because weight loss pills are cheap, easy to use, and effective. A good example of this is the Lipodrene weight loss pill.

[youtube]http://www.youtube.com/watch?v=BC2KDPIO4jo[/youtube]

Lipodrene is an ephedra-based weight loss pill manufactured by Hi-Tech Pharmaceuticals. Each tablet of the Lipodrene weight loss pill is made with a proprietary blend of the following ingredients: Ephedra Extract, Acacia Rigidula Extract, MethylSynephrine, Pheylethylamine HCL (an ingredient that can also be found in chocolates and which is known to produce a feeling of happiness and general well-being), Synephrine HCL, Theobromine, Green Tea Extract (a constant ingredient in diet pills and weight loss supplements that is touted for the beneficial effects that it has on a person s health, mind and body), Hoodia Extract, Cassia Nomame Extract, Naringen (a powerful substance that is derived from grapefruit and is known for increasing and extending the effects of caffeine and lowering cholesterol levels), Dihydroxybergamottin, 5-Methoxytryptamine HCL, L-5-Hydroxytryptophan, Yohimbine HCL, as well as Caffeine Anhydrous. The unique combination of these ingredients results in a power-packed weight loss pill that promotes fast and effective weight loss.

Stimerex-ES is a new variety of the earlier version of the Stimerex weight loss pill. This ephedra-based weight loss supplement is said to be the most powerful and most effective one available in the market today.

Stimerex-ES is a weight loss pill that is believed to be the strongest ephedra-based health supplement that can be bought without a doctor s prescription. Nutra Source is the manufacturing company behind Stimerex-ES and it claims that this is the most potent over-the-counter diet pill available in the market today.

Stimerex-ES helps increase a person s energy and helps promote weight loss. There were versions of this same weight loss pill that were previously released to the public and they already proved to be very effective for weight loss. However, according to some sources, this latest version of Stimerex is the most powerful, most effective variant ever. Thus, it would be hard to find any other product that can match its properties.

The Stimerex-ES weight loss pill is made up of the following ingredients: Citrus Aurantium or Bitter Orange, Acacia leaf Extract, Theobroma Cocoa Extract, Green Tea, Naringen, Phenylethlamine, 3-Dimethyl Aminoethanol Bitartrate, Yohimbe, and Caffeine.

Citrus aurantium is sometimes referred to as ephedra s cousin, because it is said to possess properties very similar to ephedra. Acacia leaf extract has properties that are similar to the properties of the neurotransmitter serotonin. Theobroma cocoa extract has properties that have the ability to stimulate the body s central nervous system. Green tea is a common ingredient in weight loss preparations because it has the ability to increase the body s metabolic rate. Naringen prolongs the effects of the other ingredients contained in Stimerex-ES, as well as in other weight loss pills, and enhances the absorption of nutrients in the body. Phenylethlamine is sometimes called a love chemical that can also be found in chocolates. This ingredient releases dopamine in the pleasure centers of the brain, resulting in a general feeling of happiness and well-being. 3-dimethyl aminoethanol bitartrate has effects that are similar to phenylethlamine, as it has a positive effect on mood and well-being. Yohimbe is well-known for being an aphrodisiac, but it was recently discovered to have the ability promote weight loss, as well. Finally, it is common knowledge that the combination of ephedra and the last ingredient, caffeine, work synergistically to promote weight loss faster.

About the Author: Want to know more about

Diet Pills

and

weight loss pills

? go to Netnutri.com for more information.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=265145&ca=Wellness%2C+Fitness+and+Diet

Enjoy Great Savings on Sports and Outdoors Equipment

Most truck owners would consider that buying new parts provides much more benefits, but that’s not the truth. There are many situations in which purchasing used truck parts is the better option. What is your choice? If you haven’t decided yet, take your time and take a good read of all the advantages and disadvantages of both options below. This is the only way you can be sure you are making the right decision for your truck. 

More information about truck parts online here

Buying New Truck Parts 

Advantages:

  • Warranty: One big reason to buy truck parts in new condition is that you are getting a multiple-year warranty. This means that you will not need to pay extra money for this same replacement part as long as the warranty applies. When this replacement part fails during the warranty period, you get a new part without charging.
  • Lower Maintenance Costs: With new truck parts, you will need no maintenance for the first thousands of kilometers. Additionally, most suppliers of new truck parts provide a free scheduled maintenance for a certain amount of kilometers or few years.
  • Perfect Fit: When buying new truck replacement parts from the company that has manufactured your truck, you can be sure that these parts will be a perfect fit for your truck. Of course, having the replacement parts that perfectly fit in your truck contributes to truck’s performance.

Disadvantage:

  • High costs.

Buying Used Truck Parts 

Advantages:

  • Wide Selection: While buying new truck parts limits your options, buying used truck parts provides you a much wider selection of parts, available for immediate delivery. You can find any truck part in a used condition, from engine or transmission to the smallest parts that contribute to your truck’s performance.
  • Lower Costs: The obvious reason why would you buy truck parts in a used condition is the lower costs. Used parts are always cheaper than new parts. If you are limited on budget but must repair your truck as soon as possible, buy truck parts that have been taken out of a failed truck.

Disadvantage:

  • Limited (or no) warranty; Shorter parts lifespan.

Both options come with their own advantages and disadvantages, so before you buy truck parts for your truck, you must have considered them all. While brand new truck parts are perfect when you are in need of maximized truck’s performance, used truck parts are easily available and a perfect alternative for any part.

Source: Free Articles from ArticlesFactory.com

House Inspections And Its Importance

If something does come out to be wrong with the home, you can either save yourself the time and headache or even get money taken off of the total purchase price of the home. If you’re selling the home than having an inspection beforehand allows you to know what is wrong with it prior to putting it on the market. This allows you to have time prior to selling it to fix everything that needs to be fixed. It also gives you time to put it in the selling report.

Whether you are a new home buyer or potential seller, a complete home inspection is the best purchase you could make. Knowing the full health of your home lets you know what to expect in the years to come.

Click the link for particulars about building inspection newcastle

The house inspection should notify potential and serious buyers any and all the issues or repairs that need to be fixed within the home. You want to be able to fix what needs to be prior to selling the house. This welcomes more buyers since there is less that they have to do for the house upon move in. You need to make sure that a certified inspector is hired to inspect the house. You cannot just do it yourself. They are professionals, and know what they are doing, plus they can write up the inspection report at the end for the real estate agent and for serious buyers. They also have an objective viewpoint when it comes to inspecting your home so everything will be checked out in detail. You will also have a feeling of what others will notice in your home when they first come in for a viewing.

with has to have a staging of your home to go off of. Any repairs cannot be viewable, and everything needs to be fixed prior to the staging. Once the house is completely staged for showingFeature Articles, and everything is complete and fixed you will have a better chance of selling your home for the price you would like for it. You also will have more built up confidence knowing your house is in tip top shape for showing and selling while talking to potential buyers. If you have a house inspection done this saves time during the end at closing. This is because issues will come up towards the end that might delay the purchasing process.

House inspections are an important aspect of selling or purchasing a home. You will want to make sure you have the chance to fix any and all problems in the home. If there are defects or problems in the home then there is less of a chance of receiving offers on your home.

Source: Free Articles from ArticlesFactory.com

Building a Kit Home in the Caribbean

During the 1910’s the prefabricated home made it’s first appearance in the United States. By the end of the 1950’s Sears Roebuck & Co offered mail order homes in 447 different designs. Styles ranged from the elaborate with art glass windows to the simple cottage that could be used for a family on their summer holiday.

Homes would be delivered on a train and would come with a 75 page instruction booklet to advise the customer on how to assemble the 10,000 or so pieces. A housewife could order details, such as kitchens, and room layouts to suit her family. Floor plans were customisable and so was financing, with the option of leasing a piece of land to build upon.

For specifics on granny flats lake macquarie visit that page

Nowadays, several companies offer kit homes and will ship them to the Caribbean for you to erect on your prepared site. For this two part blog, I have spoken with two different companies to understand what is possible in the world of wooden prefabricated homes, now much more commonly referred to as kit homes.

Caribbean Wood Products, is primarily an international wood broker who can supply hardwood flooring and decking; they also supply kit homes. Topsider Homes is a kit homes and buildings specialist that has been operating since 1968. The companies will help us look at the benefits, how to prepare, how to select a supplier, and what is involved. Next time around we will look at selecting and customising your home plans and taking delivery.

The ups and downs of building a kit home

When deciding whether to go with the kit method, these are some of the benefits and the downsides to consider:

Benefits

Speed – the kit home can be built faster than building in the traditional method. Once the design has been selected, then the supplier will manufacture the parts using their tried and tested processes and ensure that it all fits together.

Choice – many designs are available that can be customised to suit the tastes and needs of the owner. Manufacturers often provide customisation right through the home, including kitchen cabinets and where the electrical sockets are situated.

Quality – you are aware up front of what the quality should be, especially if you have done your homework. You know the materials being used and what you will be getting for your money. The woods used are typically hardwoods that are rot and insect resistant. Most often, the threat of hurricanes will have been considered and factored into the design.

Support – the manufacturer/supplier will be there for you and will help you decide on the building spot if necessary. With long term support this can take the pressure off and will also iron out any issues that you have along the way. Topsider has a client services department and a technical department, who have knowledgeable staff to assist you, and can even help you to recruit your builder.

Control – you will have more control over what the house looks like, the materials to be used, etc. than perhaps if you used local builders and architects. The companies have done it all before and can use their knowledge to provide outlines on how long the build will take, and what will be required to complete it. The experience of the companies will make some of the unknowns become known and take out some of the risk and fear for the owner. In addition, Topsider Homes insists that the builder takes regular photographs of the build, so that the quality of the build and the process can be checked and supported.

Downsides

The major downside could be the customs charge from accepting the kit home into particular islands. Some Caribbean islands prefer local builders to be used and local products where possible, and will tax you for going outside of this.

There will still be some issues during construction, as there appears to be with every build project. Minor delays and perhaps some cost miscalculations will occur. By finding out as much as possible beforehand, and planning for this, errors and delays can be kept to a minimum.

zugamtir5d

Selecting your site

Fortunately we have the professionals at hand to direct us on this important matter. Caribbean Wood Products’ Michael Kehl and Topsider Homes’ Andre Dumont suggest the following:

99% of the time most people, smitten by the natural beauty of the Caribbean and its relatively inexpensive beach front and other land prices, vis-Ã -vis the US or Europe, buy first and then start thinking about what to build. Some of the major issues to consider in buying property for a kit home (or any home in the Caribbean) are these:

1. Duty and tax rates on imports (not just building materials, but furniture, cars, etc.)

2. potential shipping logistics (is there easy road access from the nearest port)

3. availability of local builders and contractors;

4. infrastructure (phone, Internet, water, sewer, electric, as water-catchment, desalination or cisterns, solar and wind, etc., all add expense)

5. security (if this is a vacation home, how will it be secured when you are gone?)

6. is the soil suitable for building? Although most soils are not a problem, some require beefed-up foundations or other special consideration including for septic tanks, if required.

7. what drainage is there – Is the land in a low lying area or flood plain.

8. topography – Is the land on a steep hillside or some other difficult building circumstance? (Editor : Even if the land is on a steep hillside, some kit houses are manufactured to contend with this, such as the pedestal design where the house sits on one pedestal, and so only touches the ground in one spot).

9. the normal common sense issues relating to it being in “at-risk” area for tidal surge, storm patterns, etc.

Beware of encumbrances, including:

– Easements – An easement can be public or private, and include right of way, utilities, and occasionally, views.

– Restrictive Covenants – These can restrict use of the land and may include zoning or use restrictions and/or deed restrictions

– Building Moratoriums – Be sure you can build. Some areas restrict or suspend the number of building permits issued.

– The budget for purchasing and building on undeveloped land.

Selecting your supplier

Ideally, you will have a good relationship with your supplier and know that you can trust them to be there for you if you need them. Experience and knowledge really count here, as do other customers’ reviews of them.

In preparation for this, it would also be wise to consider some of your own factors such as:

– budget

– how fast do you need your home erected

– choice of designs

– materials

and then what is offered from the supplier in terms of:

– the suppliers experience of shipping to and building in the Caribbean

– services and support offered

– guarantee of materials

Well we have covered a fair bit on our journey through the world of kit home building but still have some way to go. In our next blog we will be looking at how to select the design of your home, and what might be required to take delivery of it.

Thank you very much to Caribbean Wood Products and Topsider Homes for the information, knowledge and advice that they have supplied for this blog.

Canadian government tax processing computers back online

Thursday, March 15, 2007

The Canada Revenue Agency (CRA) announced today that computer systems involved with the processing of tax returns for individuals are back online.

Tax processing had been halted on March 6, 2007, due to a computer glitch. The source of the problem had been traced back to software maintenance performed on March 4.

In an update on the CRA website, dated March 14, Michel Dorais, Commissioner of the Agency, stated that all of the databases had been restored and CRA employees are processing the backlog of returns and payments.

Tax processing for businesses had not been affected by the computer shutdown.

In his statement, Dorais thanked taxpayers “for their patience and understanding” during the service outage. He also stated that “the integrity and safety of personal data was never at risk”.

The CRA suggests that it would work quickly to process the resulting backlog of tax returns.

Successful Painting Contractors Vs Great Painters

Many successful painting companies are home to some skilled painters, but the sad fact is that this is not the most important element to profitable contracting. What it takes to survive in the painting industry goes beyond just the trade itself, and encompasses a wide variety of business skills. We will discuss some of these things here.

Most painters who want to run their own painting business usually know a thing or two about painting. Many have already worked for other companies as a crew member, and developed some skill and experience. After some years, one wonders why they don’t set out on their own so that they can earn more money. After all, the painter is the one doing the work, why shouldn’t they reap the rewards? The danger here is not knowing what is required to have a steady stream of job prospects, and running all aspects of the contracting business successfully. The painter knows his way around the brush, but does he know how to take the helm of a business with the same confidence?

Detailed info and services about painters newcastle here

Painting companies have several tasks in day to day operation, and production is just one of many. We will leave a discussion of the art of producing quality work for another time, and focus instead on the other aspects of contracting. The most important are lead generation and marketing, estimating and selling, and logistics.

You can’t paint and make money without the leads. The leads are the starting point, like the seeds out of which grows a healthy painting business. The painter must have systems in place to generate a regular amount of leads, enough to cover costs and produce a modest profit; otherwise what it the point? Many painters get stuck at this point, even though they can handle all the other areas of their company. Marketing in many forms should be used, and analyzed regularly to assess the effectiveness of each. You need to learn what lead finding tactics work best in your territory, and maximize investment into them. Online marketing is in most cases an important tool, so are having flyers and signs in your neighborhoods, as well as referals and word of mouth. One method alone may not bring sufficient business your way, but when you add up several lead sources, you can amass enough to make a good living.

Once you have the leads, the next step is to sell them. The art of selling can be complex, but you just need to stick to some basic principles to do fine, and have a good booking percentage. The important task of the painter in selling a painting quote is to first have an accurate and detailed estimate of the painting work to be done. You need to learn how to quote jobs well, and price competitively but at the same time making it worthwhile for you. Some painters will price low just to get some business when times are tough, but they end up regretting it when they calculate their hourly wage. The best way to stay afloat is to stick with a fair price that allows you to be comfortable, and from there focus on other selling point like great service and paying close attention to your customer’s needs. There is a saying that the minute you start discounting you start to go out of business, and this is true in painting contracting.

new painting companies sometimes have plenty of work but fall apart because their manager can’t keep track of anything. Keeping track of the numbers and the scheduling is important if you want to know how things are going, and analysis is required if you want to be able to improve anything. Budgeting and keeping on budget are crucial to production; if you lose track of your schedule, you risk unhappy customers or mistreating painters; likewise, if you don’t keep tabs on profits you risk an unhappy wallet. You should know what your monthly volume is, and have clear goals for such. Toronto painting services that succeed are capable of analysis of their performance, and keep improving all the time; having quality painting staff is just one part of the equation.

If you are thinking of starting a new painting business, you need to have a firm grasp on all these aspects of contracting if you want to be a happy painter. Otherwise you risk being overworked, underpaid, and maybe not in the right field.

This information is provided by professional Toronto painters. More information can be found at our Toronto House Painters blog.

Page 99 of 224

Powered by WordPress & Theme by Anders Norén